Quote
Quote Cart
clear all items

Filter Inventory - Search Press Filters | IPP

Used filters for sale: industrial solid-liquid separation for consistent, high-purity output

Searching equipment…

Top Press in stock

Highest-ranked available inventory for this selection.

Compare related Filter types

Refine Press

Specifications

Available Press

Showing 25 of 65 matching Press.

Stock Number: #242548
Filtration Area: 441.3 ft²
Pressure: 3 bar
Cake Volume: 72.6 ft3
Filter Press Plate Type: Membrane Plates
Number of Plates: 34
Plate MOC: Polypropylene
Skeleton MOC: carbon steel
Plate Diameter or Width: 1,200 mm
Plate Height: 1,200 mm
Plate Shifter: Yes
Plate Shifter Automatic: Yes
Plates Gasketed: Yes
Additional Information:
  • fully automatic operation,
  • plates supported on an overhead beam,
  • 33 Lenser membrane plates and 2-end plates
  • caulked and gasketed clothe
  • cake thickness 50mm,
  • drainage via internal 4-corner port,
  • plate shifter hydraulic driven by a powerpack with a 1.1kw motor,
  • powerpack for pressure mechanism with a 4kw 3/50/415 volt, 1430 rpm EEx d IIB T4 motor Plates Recessed: Yes. Plates Shifted By: Automatic.
More Details ⟶
Stock Number: #225365
Filtration Area: 398.3 ft²
Pressure: 100 psi
Temperature: 70 °F
Cake Volume: 16.3 ft3
Filter Press Plate Type: Plate and Frame
Number of Frames: 44
Number of Plates: 90
Plate MOC: Polypropylene
Skeleton MOC: 316 SS with a 20Ra finish
Plate Diameter or Width: 800 mm
Plate Height: 800 mm
Plates Shifted By: Manual
Additional Information:
  • Plates are FDA approved- Non Gasketed.
  • Polypropylene plates and frames and all Stainless Steel skeleton.
  • 44 chambers.4 eye closed delivery,1" inlet and outlet.
  • Manual closure with Hydraulic Assist manufactured by SPX.
More Details ⟶
Stock Number: #225367
Filtration Area: 33 m²
Pressure: 100 psi
Temperature: 70 °F
Cake Volume: 0.46 m3
Filter Press Plate Type: Plate and Frame
Number of Frames: 38
Number of Plates: 80
Plate MOC: Polypropylene
Skeleton MOC: 316 SS with a 20 Ra polish
Plate Diameter or Width: 800 mm
Plate Height: 800 mm
Plates Shifted By: Manual
Additional Information:
  • Plates are FDA approved and non gasketed.
  • Polypropylene plates and frames and all Stainless Steel skeleton.
  • Approximately 38 chambers.
  • 4 eye closed delivery, 1" inlet and outlets.
  • Manual closure with Hydraulic Assist manufactured by SPX.
More Details ⟶
Stock Number: #225366
Filtration Area: 37 m²
Pressure: 100 psi
Temperature: 70 °F
Cake Volume: 462 m3
Filter Press Plate Type: Plate and Frame
Number of Frames: 44
Number of Plates: 95
Plate MOC: Polypropylene
Skeleton MOC: 316 SS with a 20 Ra finish
Plate Diameter or Width: 800 mm
Plate Height: 800 mm
Plates Shifted By: Manual
Additional Information:
  • Plates are FDA approved, non Gasketed.
  • Polypropylene plates and frames and all Stainless Steel skeleton.
  • 95 plates with 44 chambers.
  • 4 eye closed delivery, 1" inlet and outlet.
  • Manual closure with Hydraulic Assist manufactured by SPX.
More Details ⟶
Stock Number: #218646
Filtration Area: 1,300 ft²
Pressure: 100 psi
Cake Volume: 75 ft3
Filter Press Plate Type: Un-Gasketed Recessed
Number of Plates: 42
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 1,200 mm
Plate Height: 1,200 mm
Plate Thickness: 2.5 in
Plates Recessed: Yes
Additional Information:
  • With Lenser polypropylene non-gasketed recessed plates type KCE (51) chambers.
  • 40mm cake thickness ,corner feed with 3 eye closed delivery
  • 3" top corner feed, 2" 3 corner discharge.
  • 3300 psi hydraulic closing pressure.
  • With US Filter/Siemens air over oil hydraulic pump with a 15 gallon oil reservoir requires 80 scfm @ 100 psi air supply.
More Details ⟶
Stock Number: #703583
Filtration Area: 12.8 m²
Temperature: 32 °F
Cake Volume: 2,400 m3
Filter Press Plate Type: Plate and Frame
Number of Frames: 32
Number of Plates: 33
Plate MOC: Aluminum
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 600 mm
Plate Height: 600 mm
Plate Thickness: 12 mm
Plates Shifted By: Manual
Additional Information:
  • Manual screw closure.
  • 4-eye closed delivery. Openings: 4-2".
More Details ⟶
Stock Number: #231224
Filtration Area: 17.5 m²
Cake Volume: 2 m3
Filter Press Plate Type: Plate and Frame
Number of Frames: 28
Number of Plates: 27
Plate MOC: Stainless Steel 316
Skeleton MOC: 316 SS
Plate Diameter or Width: 600 mm
Plate Height: 600 mm
Plate Thickness: 50 mm
Plates Recessed: Yes
Plates Shifted By: Manual
Additional Information:
  • Stainless steel recessed plate and polypropylene frame filter press.
  • (2) eye top and bottom feed/discharge.
  • Stainless steel skeleton.
  • Hydraulic press mechanism with built on power pack and manual controls
More Details ⟶
Stock Number: #230398
Filtration Area: 118 ft²
Pressure: 100 psi
Temperature: 180 °F
Cake Volume: 94.3 ft3
Filter Press Plate Type: Un-Gasketed Recessed
Number of Plates: 25
Plate MOC: Stainless Steel 304
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 18.5 in
Plate Height: 18.5 in
Plates Recessed: Yes
Plates Shifted By: Manual
Additional Information:
  • Single pneumatic hydraulic ram closure mechanism. (completely pneumatic operation, no electric, good for hazardous environments).
  • Recessed plate filter press, complete with (25) chambers(1) head plate,5 eye, closed delivery.
  • 32mm cake thickness.
More Details ⟶
Stock Number: #236127
Filtration Area: 147.8 ft²
Pressure: 5 bar
Temperature: 85 °C
Cake Volume: 6.9 ft3
Filter Press Plate Type: Plate and Frame
Number of Frames: 17
Number of Plates: 16
Plate MOC: Plastic
Skeleton MOC: 316 SS
Plate Diameter or Width: 615 mm
Plate Height: 720 mm
Plate Thickness: 26 mm
Additional Information:
  • Ex 11 2G c 1B T4(17) 615mm wide x 720mm high x 40mm thick plastic frames.
  • 495mm wide x 577mm high frame recess.
  • 0.194 cubic meter cake capacity.
  • (4) 35mm corner openings.
  • 316 stainless steel skeleton Plates Shifted By: Manual.
More Details ⟶
Stock Number: #236128
Filtration Area: 147.8 ft²
Pressure: 6 bar
Temperature: 140 °C
Cake Volume: 0.19 m3
Filter Press Plate Type: Plate and Frame
Number of Frames: 11
Number of Plates: 12
Plate MOC: Polypropylene
Plate Diameter or Width: 24.2 in
Plate Height: 28.3 in
Plate Thickness: 26 mm
Plates Shifted By: Manual
Additional Information:
  • EP plastic plate and frame filter press CE, Ex II 2G c IIB T4
  • (12) EP plastic plates, with (11) EP plastic frames with an internal 495mm wide x 577mm high opening.
  • (4) 35mm diameter corner openings.
  • Hydraulic driven press mechanism with built on power pack.
  • 316 stainless steel rip tray under plates/frames.
  • 316 stainless steel skeleton.
More Details ⟶
Stock Number: #211029
Filtration Area: 515 ft²
Cake Volume: 22 ft3
Filter Press Plate Type: Plate and Frame
Number of Frames: 33
Number of Plates: 35
Plate MOC: Lined
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 36 in
Plate Height: 36 in
Plate Thickness: 1.5 in
Plates Shifted By: Manual
Additional Information:
  • Heresite coated plate and frame filter press
  • Size 36(4) eye corner feed closed delivery with (33) chambers1 & 3 button plates 1.5" thick with hydraulic pump
More Details ⟶
Stock Number: #202024
Filtration Area: 26.5 ft²
Pressure: 15 bar
Cake Volume: 2.4 ft3
Filter Press Plate Type: Un-Gasketed Recessed
Number of Plates: 15
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 470 mm
Plate Height: 470 mm
Plate Thickness: 75 mm
Plates Recessed: Yes
Plates Shifted By: Manual
Additional Information:
  • Operating pressure 7/15 bar. 4 eye.
  • With red and blue button plates for washing.
More Details ⟶
Stock Number: #238423
Filtration Area: 958 ft²
Pressure: 100 psi
Cake Volume: 44.4 ft3
Number of Plates: 37
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 1,200 mm
Plate Height: 1,200 mm
Plate Thickness: 2 in
Plate Shifter Automatic: Yes
Plates Recessed: Yes
Plates Shifted By: Automatic
Additional Information:
  • Side bar design with semi automatic plate shifter.
  • Four eye discharge washing plates with ¼” recess.
  • Press can be upgraded to 100 cu ft cake capacity and 2079 sq. ft. filtration area with additional plates.
  • Single hydraulic piston press.
  • Bottom mounted chain driven screw conveyor for cake discharge with safety trip wire.
More Details ⟶
Stock Number: #208855
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 36 in
Plate Height: 36 in
Additional Information:
  • Skeleton Only. Has round side rails.
More Details ⟶
Stock Number: #248266
Filtration Area: 1,750 ft²
Cake Volume: 98.2 ft3
Filter Press Plate Type: Membrane Plates
Number of Plates: 67
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 47.2 in
Plate Height: 47.2 in
Plates Gasketed: Yes
Plates Recessed: Yes
Additional Information:
  • approx 162 square meter filtration area
  • 2-end plates
  • plates with pipes for cake membrane blow off,
  • four corner discharge,
  • hydraulic press mechanism with powerpack, powerpack driven by 5kW motor,
  • light curtain,
  • stainless steel discharge chute,
More Details ⟶
Stock Number: #248270
Filtration Area: 100.1 ft²
Pressure: 14.5 psi
Temperature: 248 °F
Number of Plates: 70
Plate MOC: Fibre
Skeleton MOC: 316L stainless steel
Plate Diameter or Width: 15.7 in
Plate Height: 15.7 in
Additional Information:
  • 400mm x 400mm single use fibre/316L (1.4404) stainless steel multi-layer filter press (germ filter),
  • internal pressure -1/1 bar @ -10/120 degrees C,
  • 195 liter,
  • single use fibre plates,
  • plates are pressed inside a 316L stainless steel chamber,
  • closed delivery design,
  • manual hydraulic built on pressure mechanism,
  • 316L stainless steel skeleton,
  • The Orion CDG is a sterile layered-filter for de-germination and purification. The square filters are aligned in a block. The filter block is driven hydraulically and sealed mechanically. The filter has a protective cover that makes the filter block gas proof. The filter layers operate parallel causing any infiltrates to be filtered by one layer until clean. Solid materials and residue remain in the filter.
More Details ⟶
Stock Number: #248268
Filtration Area: 1,000 ft²
Cake Volume: 43.4 ft3
Filter Press Plate Type: Membrane Plates
Number of Plates: 46
Plate MOC: Polypropylene
Skeleton MOC: Carbon steel/316L stainless steel
Plate Diameter or Width: 39.4 in
Plate Height: 39.4 in
Plates Gasketed: Yes
Plates Recessed: Yes
Additional Information:
  • approx 93.6 square meter
  • (46) 1m x 1m Polypropylene membrane plates and (2) end plates,
  • plates with pipes for cake membrane blow off,
  • top center feed, 4 corner openings,
  • hydraulic press mechanism with powerpack,
  • light curtain,
  • carbon steel/316L (1.4404) stainless steel skeleton,
More Details ⟶
Stock Number: #248269
Filtration Area: 100.1 ft²
Pressure: 14.5 psi
Temperature: 248 °F
Number of Plates: 70
Plate MOC: Fibre
Skeleton MOC: 316L stainless steel
Plate Diameter or Width: 15.7 in
Plate Height: 15.7 in
Additional Information:
  • 400mm x 400mm single use fibre/316L (1.4404) stainless steel multi-layer filter press (germ filter),
  • internal pressure -1/1 bar @ -10/120 degrees C,
  • 195 liter,
  • single use fibre plates,
  • plates are pressed inside a 316L stainless steel chamber,
  • closed delivery design,
  • manual hydraulic built on pressure mechanism,
  • 316L stainless steel skeleton,
  • The Orion CDG is a sterile layered-filter for de-germination and purification. The square filters are aligned in a block. The filter block is driven hydraulically and sealed mechanically. The filter has a protective cover that makes the filter block gas proof. The filter layers operate parallel causing any infiltrates to be filtered by one layer until clean. Solid materials and residue remain in the filter.
More Details ⟶
Stock Number: #248267
Filtration Area: 417.6 ft²
Cake Volume: 12.4 ft3
Filter Press Plate Type: Membrane Plates
Number of Plates: 24
Plate MOC: Polypropylene
Skeleton MOC: 316L stainless steel
Plate Diameter or Width: 43.3 in
Plate Height: 43.3 in
Plates Gasketed: Yes
Additional Information:
  • approx 38.8 square meter
  • (24) 1m x 1m Polypropylene membrane plates and (2) end plates,
  • (12) plates with pipes for cake membrane blow off,
  • top center feed,
  • 2 bottom corner discharge,
  • hydraulic press mechanism with powerpack,
  • 316L (1.4404) stainless steel discharge chute,
  • 316L (1.4404) stainless steel skeleton,
More Details ⟶
Stock Number: #219851
Filtration Area: 5.2 m²
Pressure: 6 bar
Cake Volume: 0.07 ft3
Filter Press Plate Type: Plate and Frame
Number of Frames: 22
Number of Plates: 22
Plate MOC: Plastic
Skeleton MOC: 304 SS
Plate Diameter or Width: 400 mm
Plate Height: 400 mm
Plate Thickness: 0.47 in
Plates Shifted By: Manual
Additional Information:
  • Seitz Enzinger plate and frame filter press (2) end plates;(4) eye.
  • Manual Screw closure
More Details ⟶
Stock Number: #208460
Filtration Area: 1,100 ft²
Pressure: 8 bar
Number of Plates: 111
Plate MOC: Stainless Steel 316
Skeleton MOC: Stainless Steel 316
Plate Diameter or Width: 1,000 mm
Plate Height: 1,000 mm
Plate Thickness: 0.35 in
Plates Shifted By: Manual
Additional Information:
  • Polishing plate filter press
  • Hydraulic press mechanism driven by hydraulic powerpac which is built into a control cabinet
  • 2 -80mm openings on plates, Stainless Steel skeleton includes (1) Photometer, manufactured by Sigrist, and stainless steel walkway platform with steps and handrail
More Details ⟶
Stock Number: #219880
Filtration Area: 5.2 m²
Pressure: 6 bar
Cake Volume: 0.07 ft3
Filter Press Plate Type: Plate and Frame
Number of Frames: 20
Number of Plates: 21
Plate MOC: Plastic
Skeleton MOC: 304 SS
Plate Diameter or Width: 400 mm
Plate Height: 400 mm
Plate Thickness: 0.47 in
Plates Shifted By: Manual
Additional Information:
  • Seitz Enzinger plate and frame filter press with (2) end plates (4) eye
  • Manual Screw closure openings (2) DN50
More Details ⟶
Stock Number: #705267
Filtration Area: 134.6 m²
Pressure: 16 bar
Cake Volume: 3.5 m3
Filter Press Plate Type: Membrane Plates
Number of Plates: 40
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 1,450 mm
Plate Height: 1,450 mm
Plate Thickness: 0.98 in
Plate Shifter: Yes
Plates Recessed: Yes
Additional Information:
  • Rubber/polypropylene membrane recessed plate filter press with a 1295mm x 1295mm x 25mm deep recess. With exchangeable soft rubber squeezing membrane.
  • 4 1/2" center bottom feed, 4-corner discharge 1/2" outlet on each plate.
  • Squeeze mechanism with double acting hydraulic cylinder.
  • Complete with hydraulic power pack driven by 3 KW, 3/60/220/380 volt,1410 rpm motor.
  • Unit with chain driven plate shifter for separation, driven by 1 HP, 3/50/220/380 volt,21.5 rpm geared motor. Plates Shifted By: Automatic.
More Details ⟶
Stock Number: #234958
Filtration Area: 187 ft²
Cake Volume: 2 ft3
Filter Press Plate Type: Un-Gasketed Recessed
Number of Plates: 16
Plate MOC: Polypropylene
Skeleton MOC: Carbon Steel
Plate Diameter or Width: 31.3 in
Plate Height: 31.3 in
Plate Thickness: 3 in
Plates Recessed: Yes
Plates Shifted By: Manual
Additional Information:
  • Currently set up as 2 cubic foot capacity with 187 sq.ft. of filtration capacity, but can be expanded or contracted.
  • Manual closure with manual hydraulic assist.
  • With four corner discharge.
More Details ⟶
Stock Number: #229373
Filtration Area: 8 m²
Pressure: 8 bar
Temperature: 80 °C
Cake Volume: 238.4 ft3
Filter Press Plate Type: Plate and Frame
Number of Frames: 10
Number of Plates: 12
Plate MOC: Stainless Steel 321
Skeleton MOC: Stainless Steel
Plate Diameter or Width: 600 mm
Plate Height: 600 mm
Plates Shifted By: Manual
Additional Information:
  • 321 stainless steel (1.4541) frames
  • Manual hydraulic closure
More Details ⟶

Shop used, secondhand and surplus filters from IPP – in stock and engineered for chemical, pharmaceutical, and food-grade applications

Streamline your process with IPP’s ready-to-ship filters designed to reduce waste, recover product, and meet regulatory standards

Used filters are essential components in countless process operations where solids must be separated from liquids. Whether you’re removing fine particulates, clarifying solutions, or recovering valuable materials, industrial filters play a critical role in improving product quality, protecting downstream equipment, and maintaining compliance. With more than 47 years of experience, IPP supplies used, secondhand, and surplus filters from 20 global plant sites and maintains an extensive inventory of 15,000+ process systems.

IPP stocks a wide range of filter types—pressure leaf, plate and frame, cartridge, vacuum drum, nutsche, and candle filters—from leading brands like Sparkler, Pall, Funda, and Millipore.

Primary uses across industries

  • In chemical processing, for separating solids from liquids in catalyst recovery, resin filtration, and acid clarification
  • In pharmaceuticals, for sterile filtration of intermediates, APIs, and final formulations
  • In food and beverage, for wine clarification, edible oil filtration, and sugar refining
  • In environmental and wastewater, for sludge dewatering and contaminant removal

Types of materials processed

  • Slurries, suspensions, and solutions with fine particulates
  • Heat-sensitive or viscous liquids requiring gentle handling
  • Solvent-based, aqueous, or corrosive mixtures

Common materials of construction

Industrial filters are built to resist corrosion, handle pressure, and maintain hygiene:

  • Stainless steel for sanitary, pharma and food-grade use
  • Carbon steel for robust chemical and utility processes
  • Hastelloy, titanium or lined steel for aggressive media or high-purity applications

Key features of process filters

  • Multiple filter formats to match flow rate and solids content
  • Jacketed options for temperature-sensitive operations
  • ASME code-rated vessels available for pressure applications
  • Options for automated cake discharge or backflushing
  • Compact, modular systems designed for integration and easy maintenance

Learn more about industrial filtration technologies and applications from Chemical Processing.

Find your industrial filter at IPP

Search the IPP inventory or contact IPP’s filter experts to locate the right used, surplus, or secondhand filter for your process. With trusted manufacturers, quality systems, and rapid delivery, IPP helps you reduce downtime and improve filtration efficiency.

Filter FAQ

Have questions about Filters or our services? Learn more about our products and why customers choose IPP.

What’s the difference between pressure leaf and plate and frame filters?
Pressure leaf filters offer continuous, enclosed operation ideal for fine filtration, while plate and frame units are great for batch operations and easier cake discharge.
Are used filters suitable for pharmaceutical or food processing?
Yes – many are built to sanitary standards and can be revalidated or retrofitted with new filter media and gaskets.
What factors should I consider when selecting a filter?
Key factors include particle size, solids concentration, flow rate, operating pressure, temperature, and chemical compatibility.
What are the benefits of buying used or secondhand process equipment from IPP?
IPP offers significant savings, reduced lead times, and global support based on more than 47 years of equipment expertise.