Filtration Area
Measure
Quote Cart
Used filters for sale: industrial solid-liquid separation for consistent, high-purity output
Highest-ranked available inventory for this selection.
Used filters for sale: industrial solid-liquid separation for consistent, high-purity output
Select one or more values to narrow the current listings.
Use this setting to include or exclude equipment with this feature.
Use this setting to include or exclude equipment with this feature.
Select one or more values to narrow the current listings.
Select one or more values to narrow the current listings.
Enter a keyword to match this specification.
Use this setting to include or exclude equipment with this feature.
Set a numeric threshold to narrow the matching listings.
Enter a keyword to match this specification.
Showing 25 of 72 matching Pressure Leaf.
500 Gallon Manufactured by Alloy Fab for Dartco Shell is .250" thick Top head is .312" thick Cone is .312/.437" thick jacket is .109" thick6.5 turns half pipe on top head18 turns half pipe on straight side5 turns half pipe bottom head All half pipe jacket is 2"
Funda filter with centrifugal discharge Shell 900mm diameter x 960mm from flanged top to bottom discharge (22) 800mm diameter filter elements @ 30mm spacing Requires 15 PS motor Wet cake discharge
Manufactured by Durco Enzinger Vertical tank horizontal Plate design, with wet cake discharge, with Slucing bar SS bolt on plate coil jacket on bottom head with bolted dished bottom with swing bolts Mounted on top is a faractioanl HP drive that turns the slucing bar that rund down the middel of the plate stack 6" diameter bottom cake discharge
Head .187" thick, shell .140" thick Horiz tank, horiz plate design. 30" dia x 60" str side. Plates: (2) 16" wide x 60" long; (2) 24" wide x 60" long; (4) 28" wide x 60" long. Dish heads on davits. 2-2" inlets on top head,
Centrifugal discharge pressure leaf filter
Cake Discharge: Dry, suitable for direct or pre-coat filtration Number of Filter Screens: 22 445 gallon 20 HP 3/60/230/460 volt Additional Features: Includes a spare filter plate pack.
1.4401/1.4571 (316SS/316SS/TI) horizontal tank Rated 4 ATU @ 120 degree C Filter housing retracts on an overhead rail for cleaning the filter (1) clamped head with ratchet closure Equipped with (30) leaves Filter housing has cake level detector and wash nozzles for the leaves mounted under the leaves fixture Equipped with (3) 1.4571 cake bins, 800mm wide x 1700mm long with casters Floor space requirements: 6500mm long x 1600mm wide x 2600mm high Designed to German TUV standards
(1) centrifugal pump Number of Filter Elements: 12. Vessel Liquid Capacity: 92.5 gallons. Scavenging: Yes. Number of Scavenging Elements: 1.
vertical leaf pressure filter Pressure rating: 4 ATU Filter housing retracts on an overhead rail for cleaning the filter. Filter tank 1200mm diameter x 2100mm straight side, (1) welded dished head, (1) clamped head with ratchet closure (30) leaves. Filter housing has cake level detector and wash nozzles for the leaves mounted under the leaves fixture. Equipped with (3) 1.4571 cake bins, 800mm wide x 1700mm long with casters. Designed to German TUV standards.
1090 liter - volume measurement in liters jacketed - type of equipment centrifugal discharge pressure leaf filter - type of filter Rated 72 PSI @ 302 degrees F internal; 72 psi, 90 liter @ 302 degrees F in the jacket (15) plates - number of plates in the filter on 80 mm spacing - distance between plates 55mm cake thickness Vessle is 1000 mm diameter. 0.42KW drive for centrifugal cake discharge
vessel # 5293GW rated inside -1/6bar volume 1.000 liter rated jacket -1/6bar volume 110 liter, vertical jacketed centrifugal discharge. Cake capacity 0.45 cubic feet.
Certified by Votator Corp horizontal plate design thru Falk gearbox, input 1750, ratio 6.246:1, output 290 Shell is 0.375 " thick head is 0.375" thick, head is 0.500" thick
vessel volume 5250 liter approx 1.6m diameter x 1.6mm straight side vertical chamber, approx 300mm discharge, mounted on (3) stainless steel legs, associated equipment includes 1 x 3000 liter vertical stainless steel pressure tank, pressure 0,5 bar to 20°C, 1.4m diameter x 1.4m straight side, weld dished top, weld coned bottom, mounted on 3 legs, 1 x approx 600 liter stainless steel tank with agitator, 2 x diaphragm pumps, 1 x Hilge centrifugal pump.
design pressure 5.69 bar @ -29/+60 deg C Shaft seal: Packed gland built to ASME V111 div 1
Shell manufactured by BHS, Serial 329063 Glass #8000. with 7-internal filter plate. full vacuum (810 liter) Feed has 2-50mm w/(2) vibratory feeders Top has additional 4-100mm nozzles Bottom discharge is 500mm
Horizontal plate design Centrifugal discharge driven by 40 HP, 3/60/230/460 volt, 1775 rpm motor thru Falk gearbox input 1750, ratio 6.246:1, output 290
15mm (0,6") thickness horizontal filter plates. 5 cubik feet cake capacity. 650mm diameter (26") x 750mm (30") straight side vertical chamber
Capacity: 760 liter Temperature Range: -25/200 deg C driven by hydraulic
Funda filter Chemap WA number: 6470 3/50/220/380 volt
Filter type: Ecofilter -10 to 50 deg C Vertical tank, horizontal leaf design with centrifugal cake discharge. Includes feed pump. built on control panel
CS jkt (18) vert filter plates Swing bolt dish top 141" thick. 1-6" center btm outlet
Internal pressure 90 psi (6.2 ATU and full vacuum) @ 200 degrees C; jacket 90 psi @ 200 degrees C (16) horizontal leaves Centrifugal discharge driven by 4 PS, 3/50/500 volt, 462 rpm XP motor
Jacketed pressure leaf/plate filter Vertical vessel with horizontal filter plates Internal volume: 410 liters Internal pressure: -1/6 bar @ -25/200 degrees C (410 liter) Jacket pressure: -1/6 bar @ -25/200 degrees C (65 liter) With manual screw press mechanism, davit assist for top cover
Jacketed pressure leaf/plate filter Vertical vessel with horizontal plates Internal volume: 410 liters internal pressure -1/6 bar @ -25/250 degrees C (410 liter), jacket -1/6 bar @ -25/250 degrees C (65 liter) With manual screw press mechanism, davit assist for top cover
Used filters are essential components in countless process operations where solids must be separated from liquids. Whether you’re removing fine particulates, clarifying solutions, or recovering valuable materials, industrial filters play a critical role in improving product quality, protecting downstream equipment, and maintaining compliance. With more than 47 years of experience, IPP supplies used, secondhand, and surplus filters from 20 global plant sites and maintains an extensive inventory of 15,000+ process systems.
IPP stocks a wide range of filter types—pressure leaf, plate and frame, cartridge, vacuum drum, nutsche, and candle filters—from leading brands like Sparkler, Pall, Funda, and Millipore.
Industrial filters are built to resist corrosion, handle pressure, and maintain hygiene:
Learn more about industrial filtration technologies and applications from Chemical Processing.
Search the IPP inventory or contact IPP’s filter experts to locate the right used, surplus, or secondhand filter for your process. With trusted manufacturers, quality systems, and rapid delivery, IPP helps you reduce downtime and improve filtration efficiency.
Have questions about Filters or our services? Learn more about our products and why customers choose IPP.
