Additional Information: 6,300 liter order number 60669 Pressure ratings: Internal -1/6 Bar @ -25/+200°C total volume 8,190 liters; Jacket rated -1/6 Bar @ -25/+200°C total volume 795 liters. Lined with glass WWG9115 With a top mounted drive with Burgmann mechanical seal type M462L-D20 and Burgmann Thermosyphon TS 2000 pneumatic bottom outlet valve, and solids dosing device,

More Details ⟶

Featured

Stock Number: #232498

New Reactor Batch-Type Agitated Stainless Steel 316L by Gale Process Solutions

Capacity (Design): 4,000 gallons

Internal Pressure: 10 bar

Internal Full Vacuum: Yes

Internal Temperature: 150 °C

Sanitary Construction: Yes

Jacket Pressure: 10 bar

Jacket Temperature: 150 °C

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 2,450 mm

Straight Side Length: 3,150 mm

Additional Information: UNUSED Internal finish 240 grit buff polished-Bright polished, external buff polish to a matte finish. ASME NB rated, and "U" stamped. welded dish heads (2:1) 12 mm thick Coil: 114 mm OD x 4 mm thick, Limpet covers bottom dish and 2615 mm of straight side (pitch 150mm). Coil heating surface area. With Insulation rings and upper drip ring. Two top lifting lugs and one tailing lug. 20" Manhole with Cover and davit arm assist, one 6" sight glass, Support Type: Lugs.

More Details ⟶

Featured

Stock Number: #247106

Reactor Batch-Type Agitated cGMP New 300 Gallon (1200L) Stainless Steel 316L

Capacity (Design): 300 gallons

Internal Pressure: 145 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Sanitary Construction: Yes

Jacket Pressure: 145 psi

Jacket Temperature: 450 °F

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 39.4 in

Straight Side Length: 55.1 in

Additional Information: • Sheathing covering Insulation rock wool and puff , 304 SS sheathing completely sealed to 0.4 bar • With thermowell and dip pipe. • Internal : Buff polished to 240 Grit. • External: Buff polished to 180 Grit. • UNDER FABRICATION, WILL BE FACTORY COMPLETE WEEK OF DEC 15 2025! Support Type: Lugs.

More Details ⟶

Featured

Stock Number: #90726

Glasslined Reactor Batch-Type Agitated Pfaudler E Type

Capacity (Design): 1,200 L

Internal Pressure: 6 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 6 bar

Jacket Temperature: 200 °C

Diameter: 1,200 mm

Straight Side Length: 1,250 mm

Additional Information: Auft # 37387 belt driven by LOHER 3.6 KW, 1715 RPM, 3/7.7-13.3A/60Hz/220-380 volt motor, ex proof (T3). Designed to German TUV standards. Reglassed in Romani by UGE 2001.

More Details ⟶

Featured

Stock Number: #241069

Reactor Batch-Type Agitated Glasslined DeDietrich SA

Capacity (Design): 3,000 gallons

Internal Pressure: 100 psi

Internal Full Vacuum: Yes

Internal Temperature: 400 °F

Jacket Pressure: 90 psi

Jacket Temperature: 400 °F

Orientation: Vertical

Agitation: Yes

Diameter: 98 in

Straight Side Length: 76 in

Additional Information: MFR # 12269 Model SA-3000 Special three top lifting lugs, six leg couplings, four side wall lugs Shell=1 & 1/64", heads=1 & 1/64", jacket =5/8" PTE size 10 drive with an EX proof 20 HP motor and a dry seal. 36" main cover. 18" man way with pro ring and sight glass assembly with man way assist.

More Details ⟶

Featured

Stock Number: #241027

Reactor Glasslined Batch-Type Agitated

Capacity (Design): 3,000 gallons

Internal Pressure: 150 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Jacket Pressure: 150 psi

Jacket Temperature: 450 °F

Orientation: Vertical

Agitation: Yes

Diameter: 96 in

Straight Side Length: 73 in

Support Type: Legs

Additional Information: Shell rated 150/FV @ 450 degrees F. Conventional jacket 150/FV @ 450 degrees F with welded 2:1 elliptical heads Alloy mixer with dual tier agitation, lower is a CBT, upper is a PBT

More Details ⟶

Stock Number: #210769

DeDietrich AE-630 850 L Glass-Lined Batch-Type Agitated Reactor

Capacity (Design): 850 L

Internal Pressure: 6 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 6 bar

Jacket Temperature: 200 °C

Agitation: Yes

Diameter: 950 mm

Straight Side Length: 780 mm

Support Type: Lugs

Additional Information: Jacket volume: 160 ltr 2-speed ex proof motor motor 3/50/60/400/690 volt

More Details ⟶

Stock Number: #222564

Stainless Steel 316 Batch-Type Agitated Reactor

Capacity (Design): 1,500 gallons

Internal Pressure: 113.8 psi

Internal Temperature: 644 °F

Jacket Pressure: 52.6 psi

Jacket Temperature: 644 °F

Agitation: Yes

Support Type: Lugs

Additional Information: • Intended use: high temperature reactor for adhesives and viscous materials • Head thickness: 18mm • Jacket thickness: 16mm with a Cyclo drive gear reducer, Model VM40-62, ratio 29 to 1, input 1200 - 300 RPM, 26 - 14 KW. Direct coupled to a 26/14 KW motor, 6/24 phase, 60 hertz, 440 volt. Final output 41/10 rpm.
Mechanical seal on shaft, wide sweep gate style agitator designed for viscous applications. Approx. 6" diameter Heating ring in bottom of vessel. • Heating ring: approx. 6" diameter in bottom of vessel

More Details ⟶

Stock Number: #247313

Stainless Steel 316 Northland Stainless Batch-Type Agitated Reactor

Capacity (Design): 120 gallons

Internal Pressure: 150 psi

Internal Full Vacuum: Yes

Internal Temperature: 300 °F

Sanitary Construction: Yes

Jacket Pressure: 150 psi

Jacket Temperature: 300 °F

Jacket Material of Construction: Stainless Steel 316

Orientation: Vertical

Agitation: Yes

Diameter: 32 in

Straight Side Length: 32.5 in

Additional Information: • Jacket thickness 0.188 • Polished, sanitary, sanitary jacket shroud. • Second vessel is NB # 1919, serial 957148 Built 1995. • On Board controls with VFD for agitator motor. CIP: Yes. Support Type: Legs.

More Details ⟶

Stock Number: #219245

Glasslined Pfaudler RB Batch-Type Agitated Reactor

Capacity (Design): 860 L

Internal Pressure: 6 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 6 bar

Jacket Temperature: 200 °C

Orientation: Vertical

Agitation: Yes

Diameter: 1,000 mm

Straight Side Length: 850 mm

Support Type: Lugs

Additional Information: Glass type: 3125, shaft driven by1.3 kW 3/ 50Hz/400/690V/1415rpm exp motor,

More Details ⟶

Stock Number: #247115

New Hastelloy - C22 Gale Process Solutions Batch-Type Agitated Reactor

Capacity (Design): 1,000 gallons

Internal Pressure: 145 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Sanitary Construction: Yes

Jacket Pressure: 145 psi

Jacket Temperature: 450 °F

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 63 in

Straight Side Length: 78.7 in

Additional Information: • Jacket Coverage bottom dish and 7/8 of shell height. • Motor "Foot Mounted TEFC, UL, EX Proof, 60Hz, 230/460V" • Sheathing covering Insulation rock wool and PUF , 304 SS sheathing completely sealed to 0.4 bar • With dip tube and thermowell • Internal: Buff polish to 240 Grit • External : Buff polish to 180 Grit • Added internal coil MOC SB 622,170 Sq.Ft. ,rated for 145 psi at 400 degrees F. Support Type: Lugs.

More Details ⟶

Stock Number: #247110

New Hastelloy - C22 Gale Process Solutions Batch-Type Agitated Reactor

Capacity (Design): 500 gallons

Internal Pressure: 145 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Sanitary Construction: Yes

Jacket Pressure: 145 psi

Jacket Temperature: 450 °F

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 47.2 in

Straight Side Length: 65 in

Additional Information: • Jacket Coverage bottom dish and 7/8 of shell height. • Motor "Foot Mounted TEFC, UL, EX Proof, 60Hz, 230/460V" • Sheathing covering Insulation rock wool and PUF , 304 SS sheathing completely sealed to 0.4 bar • With Thermowell and dip pipe • Internal Finish: Buff Polish to 240 grit • External finish: Buff polish to 180 Grit • Rev. 4 Includes internal coil 89 Sq. Ft. rated for 145 psi at 450 degrees F Support Type: Lugs.

More Details ⟶

Stock Number: #247117

New Stainless Steel 316L Gale Process Solutions Batch-Type Agitated Reactor

Capacity (Design): 2,000 gallons

Internal Pressure: 145 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Sanitary Construction: Yes

Jacket Pressure: 145 psi

Jacket Temperature: 450 °F

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 92.4 in

Straight Side Length: 94.5 in

Additional Information: • Jacket Coverage bottom dish and 7/8 of shell height. • Motor "Foot Mounted TEFC, UL, EX Proof, 60Hz, 230/460V" • Sheathing covering Insulation rock wool and puff , 304 SS sheathing completely sealed to 0.4 bar • With Thermowell and dip pipe • Internal finish: buff polish 240 grit • External finish Buff polish 180 grit Support Type: Lugs.

More Details ⟶

Stock Number: #108136

570 L (150.6 gallons) Hastelloy - C4 Batch-Type Agitated Reactor

Capacity (Design): 570 L

Internal Pressure: 64 bar

Jacket Pressure: 28 bar

Jacket Temperature: 275 °C

Agitation: Yes

Diameter: 800 mm

Straight Side Length: 1,050 mm

Support Type: Lugs

Additional Information: autoclave reactor jacket 90 liters • Designed to German TUV standards.

More Details ⟶

Stock Number: #233232

Glasslined Pfaudler KC Batch-Type Agitated Reactor

Capacity (Design): 1,500 gallons

Internal Pressure: 100 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Jacket Pressure: 90 psi

Jacket Temperature: 450 °F

Agitation: Yes

Diameter: 78 in

Straight Side Length: 65 in

Additional Information: reactor assembly

More Details ⟶

Stock Number: #231170

Used 861 L Glass-Lined Batch Agitated Reactor | Pfaudler AE-630

Capacity (Design): 861 L

Internal Pressure: 6 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 6 bar

Jacket Temperature: 200 °C

Agitation: Yes

Diameter: 1,000 mm

Straight Side Length: 1,000 mm

Additional Information: 1m diameter x 1m from main cover to bottom dish • Glass type: WWG 9115 • DIN standard: 28136 • Certification: TUV & CE stamped and certified • Ancillaries: Valves, filters, pipework, etc. may be available.

More Details ⟶

Stock Number: #231243

Stainless Steel 316Ti Highly Polished Chema Balcke-Durr VT Gmbh Batch-Type Agitated Reactor

Capacity (Design): 13,350 L

Internal Pressure: 6 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 20 bar

Jacket Temperature: 220 °C

Jacket Material of Construction: Stainless Steel 316Ti

Orientation: Vertical

Agitation: Yes

Diameter: 2,400 mm

Straight Side Length: 3,350 mm

Support Type: Ring

Additional Information: • Highly polished internals • Internal pressure: -1/6 bar @ 200 degrees C (13350 liters) • Jacket pressure: -1/20 bar @ 220 degrees C (270 liters) • driven by 11kw, 3/50/400 volt, 1460 rpm Ex motor, • mechanical seal with lubricator • TUV certified • 2-internal CIP spray nozzles

More Details ⟶

Stock Number: #231244

Stainless Steel 316Ti Highly Polished Chema Balcke-Durr VT Gmbh Batch-Type Agitated Reactor

Capacity (Design): 13,350 L

Internal Pressure: 6 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 20 bar

Jacket Temperature: 220 °C

Jacket Material of Construction: Stainless Steel 316Ti

Orientation: Vertical

Agitation: Yes

Diameter: 2,400 mm

Straight Side Length: 3,350 mm

Support Type: Ring

More Details ⟶

Stock Number: #223810

Unused Hastelloy - C276 Batch-Type Agitated Reactor

Capacity (Design): 1,300 L

Internal Pressure: 600 psi

Internal Full Vacuum: Yes

Internal Temperature: 600 °F

Jacket Pressure: 90 psi

Jacket Temperature: 400 °F

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 48 in

Straight Side Length: 38 in

Support Type: Legs

Additional Information: • ReconditionedVessel rated for 600 psi at 600 degrees F.jacket good for FV/90 psi at 400 psiAssembled with a reconditioned 4 RDTW drivemechanical seal with new bearings and seals and motor

More Details ⟶

Stock Number: #236015

Stainless Steel 317 Edel Batch-Type Agitated Reactor

Capacity (Design): 7,100 L

Internal Pressure: 3.2 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 10 bar

Jacket Temperature: 200 °C

Jacket Material of Construction: Stainless Steel 304

Agitation: Yes

Diameter: 1,800 mm

Straight Side Length: 2,050 mm

Additional Information: TUV internal pressure 3.2 bar + vacuum @ 200 degrees C (7100 liter), jacket 10 bar @ 200 degrees C (140 liter)304 stainless steel (1.4301) jacket on straight side

More Details ⟶

Stock Number: #706863

DeDietrich AE-630 847 L Glass-Lined Agitated Batch Reactor – CE-Certified

Capacity (Design): 847 L

Internal Pressure: 6 bar

Internal Full Vacuum: Yes

Internal Temperature: 200 °C

Jacket Pressure: 6 bar

Jacket Temperature: 200 °C

Jacket Material of Construction: Carbon Steel

Orientation: Vertical

Diameter: 1,000 mm

Straight Side Length: 799 mm

Support Type: Lugs

Additional Information: 630 liter • CE number: 401381 • Glass type: 3009-internal design pressure -1/6 bar @ -25/200 degrees C (847 liter)jacket -1/6 bar @ -25/200 degrees C (152 liter) • 3-finger retreat curved agitator (white glass) • vari-speed drive • Motor: 3 phase • 260/460 volt-- shaft speed 29/166 rpm • mechanical seal with lubricator • Body and top cover: Blue glass 1-50mm (jacket) • Certification: CE certified

More Details ⟶

Stock Number: #247107

New Stainless Steel 316L Gale Process Solutions Batch-Type Agitated Reactor

Capacity (Design): 300 gallons

Internal Pressure: 145 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Sanitary Construction: Yes

Jacket Pressure: 145 psi

Jacket Temperature: 450 °F

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 39.4 in

Straight Side Length: 55.1 in

Additional Information: • Jacket Coverage bottom dish and 7/8 of shell height. • Motor "Foot Mounted TEFC, UL, EX Proof, 60Hz, 230/460V" • Sheathing covering Insulation rock wool and puff , 304 SS sheathing completely sealed to 0.4 bar • with thermowell and dip pipe • Internal : Buff polished to 240 Grit. • External: Buff polished to 180 Grit. Support Type: Lugs.

More Details ⟶

Stock Number: #234935

Reglassed 500 Gallon glass lined reactor assembly

Capacity (Design): 500 gallons

Internal Pressure: 100 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Jacket Pressure: 100 psi

Jacket Temperature: 450 °F

Jacket Material of Construction: Carbon Steel

Orientation: Vertical

Agitation: Yes

Diameter: 48 in

Straight Side Length: 56 in

Support Type: Legs

Additional Information: • Motor was installed for the test, unit does not have a motor.

More Details ⟶

Stock Number: #230157

Glasslined Pfaudler RA Batch-Type Agitated Reactor

Capacity (Design): 750 gallons

Internal Pressure: 100 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Jacket Pressure: 90 psi

Jacket Temperature: 350 °F

Jacket Material of Construction: Carbon Steel

Orientation: Vertical

Agitation: Yes

Diameter: 60 in

Straight Side Length: 48 in

Support Type: Legs

Additional Information: • RA series

More Details ⟶

Stock Number: #247113

New 1000 Gallon Stainless Steel 316L Gale Process Solutions Batch-Type Agitated Reactor

Capacity (Design): 1,000 gallons

Internal Pressure: 145 psi

Internal Full Vacuum: Yes

Internal Temperature: 450 °F

Sanitary Construction: Yes

Jacket Pressure: 145 psi

Jacket Temperature: 450 °F

Jacket Material of Construction: Stainless Steel 304

Orientation: Vertical

Agitation: Yes

Diameter: 63 in

Straight Side Length: 78.7 in

Additional Information: • Jacket Coverage bottom dish and 7/8 of shell height. • Motor "Foot Mounted TEFC, UL, EX Proof, 60Hz, 230/460V" • Sheathing covering Insulation rock wool and PUF , 304 SS sheathing completely sealed to 0.4 bar • Internal: Buff polish to 240 Grit • External : Buff polish to 180 Grit • With thermowell & dip tube. Support Type: Lugs.

More Details ⟶

Request a Quote

IPP has surplus, secondhand, and used reactors in stock and ready to ship today

Streamline your operations with ready-to-install reactors from IPP’s global inventory

Used reactors play a vital role in manufacturing environments where control over chemical, thermal, or biological reactions is essential. Whether you’re scaling up active pharmaceutical ingredients, processing specialty chemicals, or conducting precision fermentation, IPP offers ready-to-ship reactors from 20 global plant sites. With more than 47 years of expertise, IPP maintains the world’s largest inventory of secondhand and surplus process equipment.

IPP stocks jacketed, glass-lined via its group company Universal Glasteel Equipment (UGE), pressure-rated, and sanitary reactors in a range of capacities and configurations. All systems are professionally inspected and available immediately for fast global delivery.

Industries and applications

In pharmaceutical manufacturing, for blending APIs, crystallization, and temperature-controlled mixing
In chemical processing, for polymerization, hydrogenation, and oxidation
In biotech, for cell culture, fermentation, and enzyme production
In food and beverage, for emulsification and thermal processing
In cosmetics and personal care, for base mixing and batch formulation

Materials processed

Solvents, acids, and high-purity liquids
Gas-phase and multiphase reactants
Viscous media, slurries, and biological cultures
Heat-sensitive and pressure-sensitive materials

Common materials of construction

Stainless steel for durability and corrosion resistance
Glass-lined steel for chemical inertness and easy cleaning
Hastelloy and other alloys for aggressive reaction environments
Carbon steel for general industrial use

Key features of used reactors

Jacketed and pressure-rated designs
Sanitary and clean-in-place (CIP/SIP) options
Custom agitators and mixing blades
ASME-coded, National Board, CRN, CE-marked, PED compliant vessels available
Units suitable for batch or continuous operation

Learn more about how reactors function in industrial process environments at Chemical Engineering.

Find your reactor equipment at IPP

Browse IPP inventory or contact IPP’s reactor equipment experts to secure the right used, surplus, or secondhand system. Equipment is inspected, stored, and ready to deliver — saving your team time and capital.
As highlighted by FineEngineeringMag, IPP is the world’s largest seller of used process plants and equipment, serving more than 160,000 customers across 15 countries. (fineeng.eu)

FAQ

Reactor FAQ

Have questions about Reactors or our services? Learn more about our products and why customers choose IPP.

What types of reactors are available from IPP?

IPP offers jacketed, glass-lined, pressure-rated, stainless, and alloy reactors for use in chemical, pharma, food, and biotech industries.

Can I find reactors suitable for sanitary applications?

Yes. IPP stocks many sanitary-grade stainless steel reactors with CIP and SIP features for pharma and food manufacturing.

Are these reactors inspected and ready for operation?

Most units are cleaned, inspected, and available for immediate deployment from our global sites.

What are the benefits of buying used or secondhand reactors from IPP?

IPP helps buyers reduce lead time, cut capital costs, and access specialized reactors that might be long-lead or custom-built new.

Reactor Inventory - Search Batch-Type Agitated Reactors | IPP

Top Batch-Type Agitated in stock

Compare related Reactor types

Refine Batch-Type Agitated

Available Batch-Type Agitated

IPP has surplus, secondhand, and used reactors in stock and ready to ship today

Streamline your operations with ready-to-install reactors from IPP’s global inventory

Industries and applications

Materials processed

Common materials of construction

Key features of used reactors

Find your reactor equipment at IPP

Reactor FAQ